Northern

01482 227333

Central

01302 341659

Southern

0203 174 0658

Woods Powr Grip MRTA8 Vacuum Lifter Anatomy of a MRTA8 Vacuum Lifter
  • More

    Rotation and Tilt

    Rotation functions allow for the load to be rotated 360 degrees (vacuum specific), whilst the tilt functions can allow the vacuum to position the load from horizontal to vertical position.

    Close
  • More

    Suction Cups

    These provide the critical contact with the load. The number and size of suction cups depends on the type of vacuum lifter and the weight of the load. It is often possible to configure cups for different load sizes, shapes and weights.

    For example, some lifters allow cups to be shut off for irregular loads. Suction cups can lift glass, plastic, stone, wood, metal and glass-reinforced concrete.

    Close
  • More

    Vacuum Gauges and Low Vacuum Alert

    A highly-visible gauge for accurate measurement of the vacuum pressure.

    In the event of a loss of suction, there are both audible and visual alarms to alert the operator.

    Close
  • More

    Dual Vacuum Pump

    Dual vacuum circuits are often independent of one another. This means that if one loses suction, the other one will still hold the load.

    Close
  • More

    Extension Arms

    Got a larger load? Simply use extension arms (where available) to assist with longer load lifts.

    Close
  • More

    Wired Remote Control

    Some vacuum lifters come with a wired remote control unit. This enables the operator to manipulate the load whilst standing in the best position to monitor the lift, enhancing safety and productivity.

    Close
  • More

    Instruction Manual Holder

    All vacuum lifters have a holder for the manual. This ensures all the required instructions are ket with the machine, allowing anyone with the correct training to use the machine safely.

    The information in the manual includes instructions of how to configure the pads for different suction cup positions and how to tilt and rotate the load

    Close
  • More

    Positioning Grab Rail

    Grab rails and handles are fitted to vacuum lifters to help the operator safely hold and position the machine. Grab rails also prevent operators from placing their hand close to areas of the lifter with moving parts.

    Close

Anatomy of a Vacuum Lifter